Here the requirement is we have to configure 3 nodes in Multi subnet environment and each node should ping to each other, later we will add these nodes in a cluster.
Steps:-
1.Install 5 nodes in our HYPERV environment.
2.set the IPaddress as specified below, you are free to use any class IPaddress.
3.The logic here is the Default gateway for each node will be NIC IP address of RRAS
1.AD-
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default gateway : 192.168.1.200 (Its default gateway will be First NIC IP adddress of RRAS).
Preferred DNS : 192.168.1.100
2.Node 1 :-
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway : - 192.168.1.200 (Its default gateway will be First NIC IP adddress of RRAS)
Preferred DNS : 192.168.1.100
3.Node2 :- in 2nd subnet
IP Address: 192.168.2.101
Subnet Mask: 255.255.255.0
Default Gateway : 192.168.2.200 (
Preferred DNS : 192.168.1.100
4.Node3 :- in 3rd subnet
IP Address: 192.168.3.101
Subnet Mask: 255.255.255.0
Default Gateway : 192.168.3.200 (Its default gateway will be 3rd NIC IP address of RRAS)
Preferred DNS : 192.168.1.100
Configure a RRAS Server and add 3 NICs and configure NIC like below.
5. RRAS :-
NIC1:
IP Address 192.168.1.200
subnet 255.255.255.0
gateway :
Primary DNS : 192.168.1.100
NIC2:-
192.168.2.200
255.255.255.0
Gateway: -
DNS: 192.168.1.100
NIC3:-
192.168.3.200
255.255.255.0
Gateway: -
DNS: 192.168.1.100
Now configure RRAS Role on RRAS server, and test each server ping from other server or not.Thanks for Reading..